Catalyst Delete Pipe

The part is used to bypass the catalyst from the exhaust to create a ‘Decat’ system. Eliminating the catalyst will greatly enhance the gas-flow and the performance, adding significant Hp to your vehicle by removing the density of the catalyst in which exhaust gases are pushed through. - This product is intended for motorsport use only and requires Stage 2 ECU remap.
- For Track Use Only!
- Fits both OE exhaust and Milltek Sport Cat back Systems
Find a Dealer
TRACK ONLY
In stock
SKU
SSXAU674

Fitting Guide:

Audi > S4 > B9 (2017-Present) > 3.0 Turbo V6 B9 - Saloon|Sedan & Avant (Non Sport Diff Cars)
Audi > S5 > B9 (2017-Present) > 3.0 V6 Turbo Sportback B9 (Non Sport Diff Models Only with or without Brace Bars)
Audi > S5 > B9 (2017-Present) > 3.0 V6 Turbo Coupe|Cabrio B9 (Non Sport Diff Models Only)
Audi > S4 > B9 (2017-Present) > 3.0 Turbo V6 B9 - Saloon|Sedan & Avant (Sport Diff Models Only)
Audi > S5 > B9 (2017-Present) > 3.0 V6 Turbo Coupe Only B9 (Sport Diff Models Only)
Audi > S5 > B9 (2017-Present) > 3.0 V6 Turbo Sportback B9 (Sport Diff Models Only & without Brace Bars)

The part is used to bypass the catalyst from the exhaust to create a ‘Decat’ system. Eliminating the catalyst will greatly enhance the gas-flow and the performance, adding significant Hp to your vehicle by removing the density of the catalyst in which exhaust gases are pushed through. - This product is intended for motorsport use only and requires Stage 2 ECU remap.

All our performance exhaust systems are designed with you in mind, and we cater to an ever-expanding range of vehicles. We believe in continuous evolution, and our research & development team work throughout the year to deliver the most in demand solutions to all your performance exhaust requirements. All of our products are made in the UK and distributed to more than 90 countries worldwide, making Milltek Sport one of the most accessible performance aftermarket brands on the market.

More Information
SKU SSXAU674
Valved No
Milltek Product type Downpipes, Sport Cats & Manifolds
Resonated Not Applicable
Tip Shape Not Applicable
Fitting Time From 1 to 1.5 hours
Pipe Diameter 63.5mm (2.5")
EC Approved No
Off Road Use Only Yes

Contains:

MSAU704REP
Copyright © 2019-present Milltek Sport Ltd, Inc. All rights reserved.